summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-17kernel/barebox/u-boot: Fix COMPATIBLE_MACHINE expressionsmortyNorbert Wesp
COMPATIBLE_MACHINE is matched as regular expression. Thus phyflex-imx6-1 matches phyflex-imx6-1 but also phyflex-imx6-11, phyflex-imx6-12 and so forth. In kernel, barebox and u-boot recipes we only want to match the exact machine. Surround the COMPATIBLE_MACHINE expressions with '^(' at the beginning and with ')$' at the end to achieve this. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Norbert Wesp <n.wesp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2019-07-17README.md: Replace 2nd maintainer s/Wadim Egorov/Norbert WespWadim Egorov
Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Norbert Wesp <n.wesp@phytec.de>
2018-12-14u-boot-imx: i.MX8M: Update recipe version to v2017.03-imx8mq-phy32.2.4-phy8Christian Hemp
Changes since v2017.03-imx8mq-phy2: phycore-imx8mq: Fix console bootarg Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-14graphics: weston: set weston output to HDMI at i.MX8MQChristian Hemp
The default output for weston is the MIPI interface. We use the HDMI interface. Set the default output to HDMI. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-14u-boot-imx: i.MX8M: Update recipe version to v2017.03-imx8mq-phy2Christian Hemp
Changes since v2017.03-imx8mq-phy1: Revert "include: configs: plc066.h: Add static ip for ethernet" phycore-imx8mq: change console to uart1 Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-14kernel: i.MX8M: Update recipe version to v4.9.51-imx8m-phy2Christian Hemp
Changes since v4.9.51-imx8mq-phy1: arm64: dts: phycore-polaris-som: Add wdog1 arm64: dts: imx8mq-phyboard-polaris: Add usdhc 1.8V support arm64: dts: phycore-polaris-som: add regulator for dvfs support arm64: dts: phytec-imx8mq-phycore-som: change interrupt gpio from eth0 drivers: clk: imx8mq: Reduce SoC Power running M4 arm64: dts: phyboard-polaris.dtsi: Add HDMI support arm64: dts: Add display connector peb-av-009 dt-bindings: Expand sn65dsi83 bridge bindings drivers: gpu: drm: bridge: Implement sn65dsi83 as a bridge drivers: gpu: drm: panel: panel-simple: change edt_etml1010g0dka display entry arm64: dts: phytec-polaris-peb-eval.dtsi: Change pin muxing arm64: dts: phytec-imx8mq-phyboard-polaris: Change pinmuxing from PCIE2 arm64: dts: imx8mq-phycore-som: add rtc0 to i2c1 arm64: dts: change console to uart1 Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-12init-imx8m: Change machine nameJanine Hagemann
Change machine name from phyboard-polaris-imx8m-1 to phyboard-polaris-imx8m-2 because of the ALPHA2 release. Signed-off-by: Janine Hagemann <j.hagemann@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-12machine: phyboard-polaris-2: Set IMXBOOT_TARGETS to HDMI supportChristian Hemp
The phyBOARD-Polaris-2 has HDMI support. For this we need the HDMI FW. So we have to build the boot image with HDMI FW support. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-11machine: Add new phyboard-polaris-imx8mJanine Hagemann
After a redesign of the hardware (revision 0 to 1) the machine phyboard-polaris-imx8m-1 is not compatible with the new revision 1. So we have to replace this machine with the new (phyboard-polaris- imx8m-2). We also have to adapt the atf recipe, kernel recipe and the uboot recipe because of this change. Signed-off-by: Janine Hagemann <j.hagemann@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-05phylib: add imx8 morty branch fixup2.2.4-phy7Stefan Müller-Klieser
This is required for the ci builder. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-05phylib: change string matching of machine soc filterStefan Müller-Klieser
For i.MX8 we will differentiate between the different families. The soc string has to be an exact match. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-04u-boot-imx: Add u-boot-imx8QM reicpe2.2.4-phy6Christian Hemp
Changes since rel_imx_4.9.51_8qm_beta2: configs: pcm064: Set env and rootfs to eMMC board: phytec: pcm064: Adding ethernet dts: phytec-phycore-imx8qm: Add fec1 as ethernet port configs: pcm064: Add random MAC for ethernet, add PHY_TI and PHYLIB doc: net: ti, dp83867: Add documentation of optional properities drivers: net: fec_mxc: Add reading of DT phy-handle node net: phy: ti: Disable FORCE_LINK_GOOD in PHYCTRL net: phy: ti: Add binding for the CLK_OUT pin muxing doc: net: ti, dp83867: Add documentation for CLK_OUT net: phy: ti: add workaround for incorrect RX_CTRL pin strap net: phy: ti: Recover from "port mirroring" N/A MODE4 net: phy: ti: Add lane swapping support in the DP83867 TI's PHY driver Net: phy: ti: Fix fifo_depth register write mx8qm: Add Phytec phyCORE-i.MX8QM support Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-04kernel: Add linux-imx 4.9.51-phy1 for i.MX8Christian Hemp
Changes since rel_imx_4.9.51_8qm_beta2: arm64: defconfig: enable drivers for Phytec i.MX8QM eval board arm64: dts: Add support for Phytec i.MX8QM eval board MLK-17366-2 usb: cdns3: decrease autosuspend timeout net: phy: dp83867: Disable FORCE_LINK_GOOD in PHYCTRL net: phy: dp83867: Recover from "port mirroring" N/A MODE4 net: phy: dp83867: Add lane swapping support in the DP83867 TI's PHY driver net: phy: dp83867: add support for MAC impedance configuration net: phy: dp83867: Add documentation for optional impedance control Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-04machine: imx8: Add support for phycore-imx8-1Christian Hemp
Adding support for phycore-imx8-1. This supports the prototype of the i.MX8 based phyCORE SOM with 2GB LPDDR4 RAM, eMMC, OctaSPI flash. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-04dynamic-layers: Add imx-sc-firmware bbappendChristian Hemp
Added imx-sc-fimware bbappend to download the firmware for Phytec i.MX8QM SOM; machine phycore-imx8-1. Used version from scfw repo: Branch: v0.4-phy Tag: v0.4-phy1 Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-04scripts: Add init script for i.MX8Christian Hemp
Added a init script for the i.MX8. This is basically the same like the i.MX8M. Only changed the MACHINE. The solution is only for the ALPHA Releases. We have to rework this for the final Releases. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-04dynamic: imx-atf: patches only for phyboard-polarisJanine Hagemann
The atf patches are only for the phyboard-polaris. Append only for this machine. Signed-off-by: Janine Hagemann <j.hagemann@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-12-04kernel: linux-mainline: Update kernel recipe to v4.9.89-phy2Wadim Egorov
Changes for v4.9.98-phy1..v4.9.98-phy2: ARM: dts: rockchip: Fix cpu0-supply on phyCORE-RK3288 Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-09-12machine: phyboard-polaris-imx8m-1 add build infoStefan Müller-Klieser
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-09-11kernel: Add linux-imx 4.9.51-phy1 for i.MX8M2.2.4-phy5Christian Hemp
Changes since rel_imx_4.9.51_8mq_ga: arm64: dts: imx8mq-phyboard-polaris: enable vpu and gpu arm64: dts: add second usb port as host arm64: dts: phyboard-polaris: Add USB host support dt-bindings: simple: Add EDTC EMTL1010G0DKA binding dt-bindings: Add sn65dsi83 bridge bindings arm64: defconfig: Add support for eGalaxTouch arm64: defconfig: Add CONFIG_DRM_SN65DSI83_LVDS drivers: gpu: drm: bridge: Add SN65DSI83_LVDS-driver drivers: gpu: drm: panel: panel-simple: add edtc_emtl1010g0dka display arm64: dts: phytec-imx8mq-phyboard-polaris: Add display support arm64: dts: phytec-imx8mq-phyboard-polaris.dtsi: Add uart4 arm64: dts: Add expansion board PEB-EVAL-01 arm64: defconfig: Added support for RTC rv4162 / m41t80 arm64: dts: phytec-imx8mq-phyboard-polaris.dtsi: Added RTC rv4162 FROMLIST: rtc: m41t80: fix SQW dividers override when setting a date arm64: defconfig: Added support for TI TLV320AIC3007 audio codec arm64: dts: phytec-imx8mq-phyboard-polaris.dtsi: Added TI TLV320AIC3007 codec arm64: defconfig: enable eeprom and eth phy arm64: dts: phyboard-polaris: set cam size to 256MB arm64: dts: Add phyBOARD-Polaris basic support net: phy: dp83867: Disable FORCE_LINK_GOOD in PHYCTRL net: phy: dp83867: Recover from "port mirroring" N/A MODE4 net: phy: dp83867: Add lane swapping support in the DP83867 TI's PHY driver net: phy: dp83867: add support for MAC impedance configuration net: phy: dp83867: Add documentation for optional impedance control Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-09-11u-boot-imx: Add U-boot-imx recipeChristian Hemp
Changes since rel_imx_4.9.51_8mq_ga: include: configs: plc066.h: Add static ip for ethernet doc: net: ti, dp83867: Add documentation of optional properities board: phytec: pcl066: Adding ethernet dts: phytec-phycore-imx8mq: Add fec1 as ethernet port configs: pcl066: Add random MAC for ethernet, add PHY_TI and PHYLIB drivers: net: fec_mxc: Add reading of DT phy-handle node net: phy: ti: Disable FORCE_LINK_GOOD in PHYCTRL net: phy: ti: Add binding for the CLK_OUT pin muxing doc: net: ti, dp83867: Add documentation for CLK_OUT net: phy: ti: add workaround for incorrect RX_CTRL pin strap net: phy: ti: Recover from "port mirroring" N/A MODE4 net: phy: ti: Add lane swapping support in the DP83867 TI's PHY driver Net: phy: ti: Fix fifo_depth register write mx8m: Add Phytec PCL066 i.MX8M Quad Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-09-11scripts: set correct MACHINE for i.MX8M initMartin Schwan
When initializing a new Yocto build with the phyLinux script show the correct MACHINE variable for the phyBOARD-Polaris. Also rename this script to be i.MX8M specific. In the future we may want to consider a better solution and not create additional scripts for every i.MX8 subfamily. Signed-off-by: Martin Schwan <m.schwan@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-08-22kernel: linux-ti: Rebase kernel to v4.4.1412.2.4-phy42.2.4-phy32.2.4-phy22.2.4-phy1Teresa Remmet
Update the ti kernel stable version from v4.4.52 to v4.4.141. v4.4.141-phy1 is only a rebase to the new stable version without any changes. Added build fixes for perf in v4.4.141-phy2: [UPSTREAM] Kbuild: fix # escaping in .cmd files for future Make [UPSTREAM] perf tools: Move syscall number fallbacks from perf-sys.h to tools/arch/x86/include/asm/ The patch directly updates the kernel to v4.4.141-phy2. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-08-22barebox: AM335x: Update recipe version to v2017.06.1-phy4Teresa Remmet
This update fixes an ECC issue in the barebox AM335x NAND driver. Changes since v2017.06.1-phy3: UPSTREAM: commands: ubi: ubiupdatevol: Reduce error code to 0 or 1 UPSTREAM: mtd: nand: nand_omap_gpmc: Fix ecc steps Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03scripts: update fsl-setup and init-imx script2.2.3-phy1Christian Hemp
Possibility to copy site.conf added. Signed-off-by: Christian Hemp <christian.hemp@posteo.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03imx-atf: customize atf to different ram configurationChristian Hemp
Add NXP patch to support different LPDDR4 configurations and set size to 1GB. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03recipes-bsp: imx-boot: rename phytec devicetreeChristian Hemp
The imx-mkimage tool use hard coded devicetree names. That it works with Phytec own u-boot devicetree, rename it to the NXP devicetree name. Signed-off-by: Christian Hemp <christian.hemp@posteo.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03machine: imx8m: Add support for phyboard-polaris-imx8m-1Christian Hemp
Adding support for phyboard-polaris-imx8m-1. This supports the prototype of the i.MX 8M based phyCORE SOM with 1GB LPDDR4 RAM and eMMC. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03imx-boot: fix dependence to host systemChristian Hemp
The mkimage_imx8 tool is dependent on the host zlib.h. Build error: mkimage_imx8.c -o mkimage_imx8 -lz | mkimage_imx8.c:26:18: fatal error: zlib.h: No such file or directory | compilation terminated. | soc.mak:17: recipe for target 'mkimage_imx8' failed | make[1]: *** [mkimage_imx8] Error 1 | Makefile:15: recipe for target 'flash_evk_no_hdmi' failed | make: *** [flash_evk_no_hdmi] Error 2 | WARNING: exit code 2 from a shell command. | ERROR: Function failed: do_compile (log file is located at Set CFLAGS to fix this error. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03scripts: Add init-imx8 scriptChristian Hemp
For the i.MX8(X,M) Alpha release we use the Yocto freescale layers and not meta-yogurt. So we have to add a new init script. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03scripts: add fsl-setup-release.shChristian Hemp
Copy fsl-setup-release.sh from the NXP layer and add meta-phytec to bblayer.conf. Also add QT recipies to BBMASK in bblayer.conf. This is needed because NXP does not use the Morty QT version. Therefore our QT patches and changes fail. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03kernel: cryptodev: remove duplicate cryptodev patchChristian Hemp
Remove the patch 0001-Adjust-to-another-change-in-the-user-page-API.patch from cryptodev-module SRC_URI for the i.MX8 boards. The patch is available in the NXP BSP. For the i.MX8 Alpha Release we are using the NXP Yocto layers so we have to remove the patch from one recipe. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-07-03kernel: linux-mainline: Update kernel recipe to v4.9.98-phy1Janine Hagemann
Signed-off-by: Janine Hagemann <j.hagemann@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-04-03scripts: init: handle release notesStefan Müller-Klieser
We store the up-to-date release notes in the meta data git repository phy2octo. The file has the same name as the full BSP version. If the init scripts finds a release note matching the BSP version, it will be copied to the base directory. Checking out a BSP in future will result in having an updated ReleaseNotes file. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-03-29kernel: linux-mainline: Update kernel recipe to v4.9.89-phy1Daniel Schultz
Changes from v4.9.18-phy1 to v4.9.89-phy1: HACK: mfd: rk808: Swap DEVCTRL bits for reboot ARM: dts: rockhip: Add PMIC restart property mfd: rk808: Add restart functionality mfd: dt-bindings: Add PMIC reset property UPSTREAM: mfd: dt-bindings: Add RK805 device tree bindings document UPSTREAM: mfd: rk808: Fix RK818 ID template UPSTREAM: mfd: rk808: Add RK805 power key support UPSTREAM: mfd: rk808: Add RK805 pinctrl support UPSTREAM: mfd: rk808: Add RK805 support UPSTREAM: mfd: rk808: Add rk805 regs addr and ID UPSTREAM: mfd: rk808: Fix up the chip id get failed UPSTREAM: mfd: constify regmap_irq_chip structures BACKPORT: ARM: dts: rockchip: Remove 1.8 GHz operation point from phycore som Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-03-27perf: add appendStefan Müller-Klieser
Disable runtime detection of the jvmti plugin build. This fixes the build if a host jdk is found. This has been fixed upstream but a morty and older backport is missing. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2018-02-02rkeeprom: Optimize for speed and add default dict valuesWadim Egorov
10ms is enough time for at24c32_set_addr()/at24c32_set_ram() to write properly to the EEPROM over I2C. This speeds up the flash process about 8 seconds. A fresh EEPROM (ID page) is filled with bits set. So we have to make sure every dictionary get() call has a default value. Otherwise we will end up with exceptions for undefined dictionary values. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-12-15scripts: switch_machine: conditionally modify confnotesJan Remmet
don't modify confnotes if there is no target selected. Used by KSP Layer which want to show confnotes unmodified to offer various targets. Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-12-15phylib: copy_file_by_priority: add scriptJan Remmet
Find file in project layer. Copy file from layer with highest layer priority. Ignore poky and meta-openembedded, because nested layers are not supported. Use copy_file_by_priority to deploy TEMPLATECONF. This allows to overwrite conf files from higher priority layers. Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-12-11barebox: AM335x: Update recipe version to v2017.06.1-phy32.2.2-phy6Daniel Schultz
Changes from v2017.06.1-phy2 to v2017.06.1-phy3: ARM: boards: phytec-som-am335x: Fix SPI boot script BACKPORT: fs: Don't bother filesystems without link support with additional stat() calls BACKPORT: fs: avoid pathes with '//' in __canonicalize_path() BACKPORT: fixup! fs: Implement links to directories Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-12-11barebox: v2017.06.0-phy1: Change video bootargsDaniel Schultz
Dynamic bootargs (linux.bootargs.dyn.) are only provided for boot scripts and will be cleared before a boot starts. Therefor the video bootargs in the config-expansion file can't be part of the dynamic bootargs. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-12-11phylib: change bsp machine search pathStefan Müller-Klieser
Instead of parsing only machines from meta-phytec, we parse all machine.conf files in all layers. We do this to be able to use the 'soc' and 'supported_builds' manifest filter in ksp projects. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-11-14qtmultimedia: fix backportStefan Müller-Klieser
This fixes commit 5b19df56: qtmultimedia: fix video playback in qml A mistake during backporting left this file in the wrong directory. Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-11-14machine: phyam335x: copy ubifs image to sd card.Jan Remmet
IMAGE_TYPEDEP = "ubifs" doesn't force creation of IMAGE_LINK_NAME.ubifs so rename it while copying. Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-11-03machine: phycore-am335x-r2-1: Fix article numberTeresa Remmet
The article number has been updated for the PCM-060 kit version already a while a ago. Fix this in BSP also. This has no effect in function of the BSP. This only removes the deprecated PM setting. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-10-13kernel: linux: Update kernel recipe to v4.12.4-phy4:2.2.2-phy52.2.2-phy4Stefan Riedmueller
Changes from v4.12.4-phy3 to v4.12.4-phy4: UPSTREAM: ARM: imx6ull: Make suspend/resume work like on 6ul UPSTREAM: ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-10-08linux-imx: refactor defconfig setup from meta-yogurt2.2.2-phy3Stefan Müller-Klieser
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-09-27kernel: linux: Update kernel recipe to v4.12.4-phy3:2.2.2-phy22.2.2-phy1Stefan Riedmueller
Changes from v4.12.4-phy2 to v4.12.4-phy3: ARM: dts: imx6ul-segin: add ethphy settings ARM: imx6ul: phy_fixup consider led-mode Revert "serial: imx: support RS-485 Rx disable on Tx" serial: imx: in RS485 mode set cts pin low at startup and idle serial: imx: Ignore disabled interrupts serial: imx: Don't disable UCR2_TXEN and UCR2_RXEN serial: imx: Config uart to rs485 in probe imx_v6_v7_defconfig: disable CONFIG_PROVE_LOCKING imx_v6_v7_defconfig: Enable userspace governor ARM: dts: phyCORE-i.MX 6UL: Delete EEPROM ID page node ARM: dts: phyBOARD-Segin: Use 4-bit bus width for peb-wlbt-01 Also removed the phyboard-segin-imx6ul-5 from COMPATIBLE_MACHINES since the Wifi-Kit is only used with the Vendor BSP. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-09-27kernel: AM335X: Update recipe version to v4.4.52-phy5Daniel Schultz
Chages from v4.4.52-phy4 to v4.4.52-phy5: arm: dts: am335x: regor: Fix ethernet phy1 Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
2017-09-27machine: phycore-emmc-am335x-1: Remove WiFi supportDaniel Schultz
No default device tree exists with WiFi support. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>